22
BA551601-en
6
Inspection and Maintenance
6.1
Safety Information
WARNING
•
The relevant safety and health regulations must be observed.
•
Wear personal protective equipment.
•
Service work may only be carried out by authorised service technicians.
•
Repairs, maintenance and set-up work should only be carried out when the
machinery is stationary.
•
Maintenance and repair work should only be carried out when the lift is load-
free.
•
Only use original replacement parts.
•
Substances that are hazardous to the environment must be disposed of ap-
propriately.
•
Do not use high-pressure or steam-pressure equipment or harsh cleaning
agents to clean the pit lifters.
•
The safety features must not be replaced or overridden.
6.2
Care Instructions
•
Periodically clean the equipment and treat it with a care product.
•
Repair damage to the paintwork immediately to prevent corrosion.
•
Do not use caustic cleaning agents or high pressure and steam jet cleaners
to avoid equipment damage.
6.3
Inspection and Maintenance Plan
Daily before Operating
•
Residues of underbody sealant and other impurities can destroy the seals.
Regularly clean the piston rod!
•
Damage to the piston rod allows cleaning agents and salt water to penetrate
unhindered and cause major damage inside. Check the piston rod for dam-
age.
•
Check the function of the safety device.
Weekly
•
The jack must be extended to full lifting height at least once a week and
pumped through a few times with the lowering spindle closed. This automat-
ically bleeds the jack and removes the accumulated leakage oil.
•
Drain maintenance unit weekly, check oil level and check for function. Keep
the maintenance unit clean.
Summary of Contents for MPJ 16.5/750 1S FA
