BA551601-en
19
5.2
Preparing the Lifting Operation
5.2.1
Initial Position
1 Piston rod is in lowered position.
2 Air supply is available and connected.
3 Load carrying device is attached, see section
“
General Operating Instructions
for Lifting Accessories”.
4 Keep support systems ready, see section
“
General Operating Instructions for
Lifting Accessories”. For handling and operatio
n see Original Operating
Instructions
“Lifting accessories for Pit Jacks”
.
5.2.2
Positioning the Vehicle and the Pit Jack
1 Slowly and carefully position the vehicle centrally above the pit.
2 Parking brake must be released.
3 Position the pit jack below the lifting point (centre of gravity of the
component to be lifted).
5.2.3
Checking the Safety Device
The safety device can be checked by actuating the lowering spindle:
1 Turn the lowering spindle counterclockwise.
2 Release the lowering spindle, it must return to its initial position.
3 Additionally check the torsion spring for corrosion and damage.
Summary of Contents for MPJ 16.5/750 1S FA
