Maguire Products GRAVIMETRIC AUGER FEEDER MGF-ST, Original Instruction Manual

Page: 18 / 50

M A G U I R E P R O D U C T S , I N C .
18
G R A V I M E T R I C A U G E R F E E D E R

SETUP Menu
– Password protected access to MGF Settings including: SETTINGS, SCALE
CALIBRATION, COMMUNICATIONS, LOADER OPERATIONS, METERING RATE,
PARAMETERS, PRINT OPTIONS, UPDATE USB FIRMWARE, UPDATE FIRMWARE, RATE
ADJUST RESET, VIEW/RESET TOTALS, RESTORE FACTORY DEFAULTS.
SETTINGS -
CHANGE PASSWORD, MODE, UNITS, LANGUAGE, SET DATE AND TIME.
CHANGE PASSWORD – Used to change the factory password
For security purposes, you want to change the factory password to protect setup
information from modification. The default password is “2222”. Four digits (0 through 9)
are required. A modified password will not reset back to factory default after a software
upgrade. If you changed the password but forgot what it is, please contact Maguire
Products. The following describes how to change the factory password.
Press To scroll down to SETUP (using arrow key)
Press ENTER Display will say:
ENTER PASSWORD _ _ _ _
Enter 2222 Default password is 2222
Press ENTER to enter SETTINGS.
Press
ENTER to select CHANGE PASSWORD
You will be prompted for a New Password.
Enter a new 4-digit password or press BACK to exit without changing the
password.
You will be prompted to confirm the new password. Enter your new password
again.
The display will show Password Changed.
Press BACK three more times to exit SETUP and go to the Main Screen