Maguire Products GRAVIMETRIC AUGER FEEDER MGF-ST, Original Instruction Manual

Page: 13 / 50

M A G U I R E P R O D U C T S , I N C .
13
G R A V I M E T R I C A U G E R F E E D E R

START UP PROCEDURE
1. Turn POWER ON:
The opening screen displays for 5 seconds,
and shows your software version number in
the lower-right and the USB Version in the
upper-right. The display then shows the Main
Screen of the MGF. Depending on your Mode
of Operation, the Main screen will either
display Shot Weight or Pounds Per Hour (or
KGS/Hour).
================03.68
Maguire
MGF
===============J0323A
CYCLE MODE:
==== MAIN MENU ======
SHOT WT 200
LDR 1.00%
LOAD=== xxxx =SIG:XX
CONTINUOUS and
EXTR FLLW MODES:
==== MAIN MENU ======
LBS/HOUR 200
LDR 1.00%
LOAD=== xxxx ======
Adjustments
SHOT/WT or LBS/HOUR -
Depending on your selected Mode, the display will show
SHOT/WT or LBS/HOUR . To adjust this value, follow these instructions:
Using the Arrow buttons, select SHOT/WT or LBS/HOUR (selection indicated with the
)
Press ENTER Display will highlight the value on the right.
Enter NEW value using the keypad. When new value has been entered, press enter
or fill in all digits.
LDR – Let Down Ratio -
To adjust this value, follow these instructions:
Press
once to highlight LDR (selection indicated with the
)
Press ENTER Display will highlight the value on the right.
Enter NEW value using the keypad. When new value has been entered, press enter
or fill in all digits. The decimal is hard coded to 100
ths
of a %.