1. Uneven brightness in
Objective is not engaged in
Engage the objective into
7
observation field.
the light path.
position until it clicks.
The condenser is too low.
Move it to the upper limit.
14
The objective, eyepiece,
Clean them thoroughly.
condenser and/or window
V
lens are dirty.
. Dust or stains are visible
The eyepiece, condenser,
Clean them thoroughly.
in observation field.
window lens and/or speci-
V
men glasses are dirty.
Under certain conditions, performance of the microscope may be adversely affected by
factors other than defects. If a problem occurs, please review the following list and take
remedial action as needed. If you cannot solve the problem after checking the entire list,
please contact your area Magnus representative for assistance.
