Repeated ON and OFF of the main switch may cause
malfunction.
1. Set the main switch to “
O
” (ON).
2. Adjust the brightness by rotating the brightness
adjustment knob .
Rotating the knob in the direction of the arrow
increases brightness and rotating it in the opposite
direction decreases brightness. ( )
Fig. 15
Fig. 16
1
2
3
4
5
2
1
2
Set the specimen’s glass plate carefully. Be careful
not to damage the glass slide edges by returning
the bow-shaped lever violently or releasing the
bow-shaped lever knob in the middle of operation.
1. Fully lower the stage by rotating the coarse focus
adjustment knob‚ in the direction of the arrow.
2. Open the bow-shaped lever outward, place the
specimen glass plate ƒ , gently return and fix the bow-
shaped lever to the original position.
1
1
2
1
3