OPERATION MANUAL
14
3.MIG MODE SETTING
Selection of handle methods
2-step welding: When you press the
button of the torch, it start to weld by
holding the button, when release, it
stop welding.
4-step welding: When you press the
torch and then release, it start to weld.
When press again, it stop welding. 4T
mode is recommended in long time
welding situation.
Selection of welding pulse
1. For no pulse selection, please
choose the first one.
2. For single pulse selection, please
choose the second one.
3. For double pulse selection, please
choose the third one.
Selection of welding material
MIG machine can weld 5 kinds of
materials. Carbon steel, stainless steel,
Al-Mg, Al-Si, Cu-Si.
Welding pure Aluminum please choose
Al-Si material.
