OPERATION MANUAL
12
1.WELDING MODE SETTING
Press button
or
to select the welding mode, then press
to next step.
Synergy mode
MIG mode
TIG mode
MMA mode
2. Synergy MODE
Under the Auto mode, you can select the material, thickness and the wire diameter, then you can start your
welding, the machine will recommend the welding current, voltage and the wire feeding speed for you. Of
cause you can adjust them yourself according the welding needs.
Note
：
Re-set the material and thickness, the system will recover to default data.
In synergy mode, 4T is not available. Please choose MIG mode for 4T control steps.
Synergy is specially recommend to welding freshman.
