Magnum Energy MagWeb GT Owner'S Manual Download Page 2

Page: 2 / 34

Disclaimer of Liability
The use of this manual and the conditions or methods of installation,

operation, use, and maintenance of the

MagWeb GT

are beyond

the control of Sensata Technologies. Therefore, this company does

not assume responsibility and expressly disclaims liability for loss,

damage, or expense whether direct, indirect, consequential or

incidental that may arise out of or be in any way connected with such

installation, operation, use, or maintenance.
Due to continuous improvements and product updates, the images

shown in this manual may not exactly match the unit purchased.

Restrictions on Use

The

MagWeb GT

may only be used in life support systems with the

express written approval of Sensata Technologies. Failure of this

device can reasonably be expected to cause failure of that life support

system, or to affect the safety or effectiveness of that system. If the

MagWeb GT

fails, it is reasonable to assume the health of the user

or other persons may be endangered.

Copyright Notice

Permission to copy, distribute, and/or modify this document is

prohibited without written permission from Sensata.

Document Information

Description –

MagWeb GT

Owner’s Manual

Part Number –

64-0086 A Owner Manual, ME-MGT-MW

Date Published – December 2016
This entire manual is available for download—with many of the

diagrams available in color—on our website.
Contact Information
Sensata Technologies
2211 West Casino Rd.
Everett, WA 98204
Phone: (425) 353-8833/Fax: (425) 353-8390
Web:

www.SensataPower.com

Thank you from all of us at Sensata for purchasing this MagWeb GT.
The MagWeb GT is a product under the Magnum Energy brand from

Sensata Technologies.

We understand there are many purchasing

options in the marketplace, and are pleased that you have decided

on a Magnum product.

Summary of Contents for MagWeb GT



































Search results

Summary of Contents for MagWeb GT

Reviews:

Related manuals for MagWeb GT

Brands by name

Popular brands

Magnum Energy MagWeb GT, Owner'S Manual

Search results

Summary of Contents for MagWeb GT

Reviews:

Related manuals for MagWeb GT

Brands by name

Popular brands