© 2016 Sensata Technologies
8
3.0 Setup
3.1
Initializing the MagWeb GT
Once power is supplied to the MagWeb GT, its LCD display
automatically goes through a series of initialization screens.
Initialization Sequence
Approximately 10 seconds after applying power, the following info
appears on the LCD display in sequence (see Figures 10-13).
Note: The IP addresses shown on the MagWeb GT displays for this
section (Figures 11-15) are only examples.
1. Loading the software fi rmware (Figure 10).
Figure 10, MagWeb GT Loading Software
Wireless IP Address
2. Awaiting the entering of inverter IDs (Figure 11 & Figure 12).
The fi rst time (see note at top of next page) the MagWeb GT
is powered up it displays the available internal LAN IP address,
as well as the Wireless network IP address. See Managing
the Network Connection on page 19
if you need to access the
MagWeb GT through the Local Area Network (LAN).
Figure 12, Input Inverter ID Display
LAN IP Address
Figure 11, Available LAN/Wireless IP Addresses
Loading...
L: 192.168.1.101
W: 192.168.1.102
Setup
The display alternates (every 5 seconds) between the IP
addresses (Figure 11) and an Input Inverter ID on Local Web
screen (Figure 12) at this point in the process.
Input Inverter ID
on Local Web
Summary of Contents for MagWeb GT
Page 1: ...Owner s Manual MagWeb GT ...
