Operation Instructions
MBE35_50 OPERATION MANUAL 2005_10
56
10.3 Check the barrier arm and the attachment kit
Inspect the barrier arm for physical damage and check if the barrier arm attachment
kit is used properly and all parts are in place and tight. Perform this inspection every
six months.
10.4 Checking the Loop Detectors and Loop Wires
Check the frequencies of the loops every six months. The loop wires should be
replaced approximately every four years or as needed. Check the loop sealant every
year for cracks or peeling. Replace if needed.
10.5 Check safety signage
Inspect for proper attachment of all safety related signage such as Gate Cabinet and
barrier arm safety sticker.
