Flex Mini System Instruction Manual
June 2015
Page 24 of 25
5. STATUS & WARNINGS
5.1 TRANSMITTER STATUS LIGHT INDICATIONS
Type
Display Type
Indication
1
1 red blink
Transmitter low battery
Change battery immediately
2
Constant red
Transmitter power off due to low battery condition
3
2 red blinks
Button jammed or defective
(for keypad type 2 & type 3 setups only)
4
Green blinks
Transmission in progress
5
1 green blink every 4 seconds
Transmitter on standby
(for keypad type 2 & type 3 setups only)
Note on Type 3 above:
A jammed or defected button is shown by 2 red blinks on the Status LED when pressed. For
example, when 2 red blinks are shown on the Status LED, press each button, one at a time, to see which one is jammed
or defective. A good working button will not display any lights on the Status LED when pressed, while a jammed or
defective button will blink red twice when pressed.
5.2 RECEIVER STATUS LIGHT INDICATIONS
Type
Display Type
Indication
1
Fast green blinks
Decoding in process
2
Slow green blinks
Decoding on standby
3
Constant red blinks
Incorrect serial Number/ID code received
4
Constant red
Receiver Low voltage
5.3 RECEIVER COM LIGHT INDICATIONS
Type
Display Type
Indication
1
Constant red
Power to the relay board
2
Off
No power to the relay board
5.4 RECEIVER POWER LIGHT INDICATIONS
Type
Display Type
Indication
1
Constant red
Power to the receiver
2
Off
No power to the receiver