Flex Mini System Instruction Manual
June 2015
Page 22 of 25
WALL
WALL
Secure the mounting bracket to the wall or equipment via two screws (not provided with the system).
Slide down the receiver along the guided track to secure the receiver to the mounting bracket (see
below). Make sure the screws are tightened after installation.
Remove the receiver by pressing down the bracket release and pull the receiver upward until it clears
the guided track (see below).
Remove the two components (shown on the right with
arrows pointing to them) when the 380~400VAC or 410~460VAC
power transformer is used.
