Flex EM/EX HazLoc System Instruction Manual
June 2019
Page 57 of 62
7.1.7
Changing Transmitter Batteries
Refer to the Enrange Flex EM/EX/Pro Transmitter ATEX/IECEx Information sheet
(198-80210-0010) for a list of batteries approved for use with the Flex HazLoc
system.
Change the transmitter batteries by unscrewing the battery cover located on the
backside of the transmitter
(see Fig. 26)
. During battery installation, make sure that the
blue ribbon is centered between the two batteries. After changing the batteries, also
make sure that all screws are tightened to at least 3 in-lbs. to avoid water, moisture, dirt,
grease, or other liquid penetration.
Fig. 26
1
2
↓