Flex 8RS System Instruction Manual
December 2012
31 of 36
Type B
Type C
f.
In case of an emergency, pressing down on the red emergency stop button will
immediately disconnect the receiver mainline (Status LED blinks red). To reset the
emergency stop button just rotate the red button either clockwise or counter-clockwise; it
will pop up. When the green light appears, rotate the power key to “Start” position to
resume operation (depends on JP3 setting on page 23).
g.
After 5 minutes of inactivity (push button not pressed) the receiver MAIN will be
disconnected temporarily (depends on JP1 & JP2 settings on page 23). To resume
operation just rotate the power key switch to START position to reconnect the receiver
MAIN.
h.
Turn off the transmitter power by rotating the power key counter-clockwise to “Off” position; it
will disconnect the transmitter power and the receiver MAIN altogether. Turn it further
counter-clockwise to release the key.
