Magnetek 188-10130, Instruction Manual

Page: 24 / 67

RVS-DX, Digital Soft Starter Instruction Manual—04/01/04
4-4
Keypad Arrangement
Keypad Description
Mode This button scrolls through the following modes:
Display Only
Main Parameters
Start Parameters
Stop Parameters
Dual Adjustment Parameters
Special Feature Parameters
Fault Parameters
I/O Programming Parameters
Serial Communication Parameters
Statistical Data
Select This button scrolls through the various parameters
Up Arrow Increases a parameter setting
Down Arrow Decreases a parameter setting
Store Saves the modified parameters. The “STORE” button will only save the modified
parameter when pressed after the LCD display reads “STORE ENABLE”. The “STORE
ENABLE” will follow the last parameter within each mode.
Reset Cancels a displayed fault and allows restarting. The “Reset” button is only operable if
the start command has been removed and the fault condition is cleared.
S