BS78
(G)
(5)
警告
本装置を機械指令 (EN 60204-1) の適合を受ける機器
にご使用の場合は、その規格に適合するように方策
を講じてから、ご使用ください。
Warning
When using this device with equipment governed by
Machine Directives EN 60204-1, measures should be
taken to ensure conformance with those directives.
Warnung
Wenn dieses Gerät mit Ausrüstungsteilen verwendet
wird, die von den Maschinenrichtlinien EN 60204-1
geregelt werden, müssen Maßnahmen ergriffen
werden, um eine Übereinstimmung mit diesen
Normen zu gewährleisten.
[For U.S.A. and Canada]
THIS CLASS A DIGITAL DEVICE COMPLIES WITH
PART15 OF THE FCC RULES AND THE CANADIAN
ICES-003. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS.
(1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND
(2) T H I S D E V I C E M U S T A C C E P T A N Y
INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT
MAY CAUSE UNDERSIGNED OPERATION.
CET APPAREIL NUMERIQUE DE LA CLASSE A
EST CONFORME A LA NORME NMB-003 DU
CANADA.
[ For EU and EFTA countries ]
CE Notice
Marking by the symbol CE indicates compliance with
the EMC directive of the European Community. This
marking shows conformity to the following technical
standards.
EN 61000-6-4
"Limits and methods of measurement of radio
disturbance characteristics of industrial, scientific and
medical (ISM) radio-frequency equipment"
EN 61000-6-2
"Electromagnetic compatibility (EMC) - Part 6-2 :
G e n e r i c s t a n d a r d s - I m m u n i t y f o r i n d u s t r i a l
environments"
For DC power-driven products to meet EN 61000-6-2, the
following operational conditions must be satisfied.
1. Input and output signal cable length
: 30 m or less
2. Cable length for input power source
: 10 m or less
3. Scale cable length
: 30 m or less
Note
When using the same cable for output signal and input
power source, the cable must not be longer than 10 m.
For AC power-driven products to meet EN 61000-6-2, the
following operational conditions must be satisfied.
1. Input and output signal cable length
: 30 m or less
2. Scale cable length
: 30 m or less
