![background image](http://html1.mh-extra.com/html/magnavox/mdr161v/mdr161v_owners-manual_692469029.webp)
English
Français
Español
EN
– 29 –
Continued on next page.
To stop the timer recording in progress
1
Press
[
C
]
on the remote control.
• Confirmation window will appear.
2
Use
[
K
/
L
]
to select “Yes”, then press
[OK]
.
• To stop the timer recording immediately, press
[
C
]
on the
unit.
Checking, canceling or correcting the timer
programming information.
1
Press
[TIMER SET]
.
2
Press
[TIMER]
.
3
Check the information.
Timer Programming
THU APR/16 11:00AM
SP (1:00)
APR/17/15 12:00 AM L1 SP
Date
Start
End
L1/L2
APR/17 12:00AM 1:00AM
L1
New
Program
4-A
To delete the timer program:
1. Use
[
K
/
L
]
to select the program you would like to
delete, then press
[OK]
.
2. Use
[
K
/
L
]
to select “Delete”, then press
[OK]
.
• Confirmation window will appear.
3. Use
[
K
/
L
]
to select “Yes”, then press
[OK]
.
4-B
To correct the timer program:
1. Use
[
K
/
L
]
to select the program you would like to
correct, then press
[OK]
.
2. Use
[
K
/
L
]
to select “Program Change”, then press
[OK]
.
3. Correct the timer program by using
[
K
/
L
/
0
/
1
]
,
then press
[OK]
.
5
Press
[TIMER]
to exit.
6
Press
[TIMER SET]
to return to the timer standby
mode.
Note(s)
• Press
[TIMER]
to check the timer recording in progress.
While the timer recording is proceeding, that program will
be highlighted in red. In this case, you cannot select any other
program.
If the timer program did not complete correctly, an error
number appears in the timer programming list.
Timer Programming
1/1
FRI APR/17 11:00PM
Date
Start
End
L1/L2
E41
APR/17
12:00AM 1:00AM
L1
New
Program
Each error number means:
E 1 - 2 2
E37-39
Recording error other than below
E23-24 Unrecordable disc
E25-28 Copy prohibited program
E29
Disc protected
E30
Disc full
E31-32 Already 99 titles recorded
E33
Already 999 chapters recorded
E34
No space for Control information
E35
PCA
*
full
E36
Already finalized video format disc
E40
Some portion has not been recorded because of
program overlapping. Recording did not start at the
start time.
E41
Power failed
E42
No disc when recording
• A program with an error number is grayed out in the
timer programming list.
• A timer program with an error number will be cleared
once the entry screen for the program is displayed.
*
PCA is a disc’s space reserved for recording test.