English
Français
Español
EN
– 11 –
Continued on next page.
Rear Panel
1
2
3
7
9
10
8
6
4
5
3
1. AC Power Cord
• Connect to a standard AC outlet to supply power
to this unit.
• Unplug this cord from the AC outlet to
completely shut down the unit.
2. HDMI OUT jack
Use an HDMI cable to connect to a display with an
HDMI compatible port.
3. AUDIO OUT jacks
Use to connect a TV monitor, AV receiver or other
device with an RCA audio cable.
4. VIDEO OUT jack
Use to connect a TV monitor, AV receiver or other
device with an RCA video cable.
5. VIDEO IN jack (L1)
Use to connect an external device with an RCA
video cable.
6. AUDIO IN jacks (L1)
Use to connect an external device with an RCA
audio cable.
7. S-VIDEO IN jack (L1)
Use to connect the S-video output of an external
device with an S-video cable.
8. COMPONENT VIDEO OUT jacks
Use to connect the component video inputs of a TV
monitor with a component video cable.
9. S-VIDEO OUT jack
Use to connect the S-video input of a TV monitor,
AV receiver or other device with an S-video cable.
10. COAXIAL DIGITAL AUDIO OUT jack
Use to connect the digital audio coaxial input of an
AV receiver, Dolby Digital decoder, or other device
with a digital audio coaxial cable.
Note(s)
• Do not touch the inner pins of the jacks on the rear panel.
Electrostatic discharge may cause permanent damage to
the unit.
• This unit does not have an RF modulator.
Caution when using S-video, component, or HDMI
connection for VCR:
• Only video/audio playback is available with these
connections.