Step 4:
Slide the remaining end of the #4354
Center Axle through the RIGHT collar. Push
through fully. Do the same process to the
other 3 sets of #4354 Center Axles and #4351
Idlers.
Step 5:
Secure #4354 Center Axles with (1)
5/16”-18 x 1 1/4” Spin Lock Bolt and (1) 5/16”-
18 Spin Lock Nut...tighten. Insert a #2061
Grease Fitting into end of each #4354 Center
Axle...tighten.
Do the same process to the
other 3 sets of #4354 Center Axles & #4351
Idlers.
See picture above.
Once assembly is complete, flip over your
#4352 L & R Idler Frame Assemblies. They
should look like the below picture.
Note: The
#4352R Idler Frame Assembly is shown
below.
Step 6:
Remove the (3) bolts
from each side
of the body, for later re-assembly.
See picture
in the next column.
For the next steps,
Bolts 1, 2 and 5
are the
5/16” Bolts
and nuts that you removed from
your body wall above.
Bolts 3 and 4
are new
3/8” Bolts
and Nuts. Having a helper avail-
able in this process to hold the assembly up
and spin on the nuts will make the process
much easier.
Step 7:
Loosely, attach
Bolt - 1
through the
#4352R Idler Frame Assembly, then through
the body wall. Attach a
5/16” Nut
to the inside
of the body wall. See picture below.
Step 8:
Loosely, attach
Bolt - 2
through the
#4352R Idler Frame Assembly, then through
the bodywall. Attach a
5/16” Nut
to the inside
of the body wall. See picture below.
Step 9:
Loosely, attach
Bolt - 3 & Bolt 4
through the
LOWER HOLES
on the Track Ex-
pander, then through the #4352R Idler Frame
Assembly. Attach a
3/8” Nut
to the inside of
the #4352R Idler Frame Assembly. See
below.
56
4352R
Idler Frame
Assembly
Bolt
2061
2061
4351
4351
4354
Bolt - 1
Bolt - 2
Bolt - 3
Bolt - 4
Bolt - 5
5/16”
3/8”
4352R
Idler Frame Assembly
Track
Expander
5/16” Spin
Lock Bolt
& Nut
2061
4352R
Idler Frame Assembly
(Upside down view)