BLUEPIRAT2 | USER MANUAL/
page 20 of 82
On the right side the sub category number and the total numbers of sub categories will
be displayed (see above).
6.7
Info
This main category has currently twelve sub categories:
6. Firmware:
current firmware of the logger
7. Hardware:
mainboard version of the logger
8. SerialNr:
Serial Number of the logger
9. Date/Time
Date and time of the logger
10. Storage:
used / protected storage of the hard disc
11. Ext. Mem. Storage: used storage of the external memory / memory size
12. Ext. Mem. Dev:
status of the external memory (e.g. CF Recordig)
13.
DHCP …
DHCP status (e.g. DHCP Server)
14. IP:
IP address of the logger
15. TERM-IP:
Terminal IP address
16. Config:
name of the logger configuration
17. WLAN-IP
optional WLAN IP address
By rotating the
[menu]
knob you can navigate through the info list.
6.7.1 Licenses
By entering this main category the logger will list all installed licenses. The message <No Li-
censes> appears, if no license is installed. By rotating the
[menu]
knob you can navigate
through the license list.
6.7.2 Functions
Currently there are two functions available:
Reset IP Config
If the logger has an unknown IP configuration and you have no access to the logger, there is a
possibility implemented to reset the IP configuration back to the factory mode (DHCP Server
and IP 192.168.0.233).
Rotate the
[menu]
knob till you see “Reset IP Config” and then push the knob to reset the IP
configuration. After that, the message <IP Config reset to mode DHCP Server> will be dis-
played. To assume this setting, a restart is necessary.
Lock Keypad
If this function will be started by pressing the
[menu]
knob, the BLUEPIRAT2 lock its control el-
ements without any confirmation and the message <Keypad locked> appears.
By pressing the
[OFF / Esc]
button for more than 5 seconds the control elements will be un-
locked and the message <Keypad unlocked> appears for a short time.