EN
www.magmaweld.com
Monotig 160ip
19
USER MANUAL | KULLANIM KILAVUZU
Flat DC TIG / Pulse DC TIG Button
İs for selecting Flat DC TIG / Pulse DC TIG.
When Flat DC TIG is selected, and LED
(14)
lights.
When Pulse DC TIG is selected, and LED
(15)
lights.
13
16
17
18
19
20
21
22
23
24
25
26
Pre-Gas Flow Time LED
İs selected by pushing multifunctional knob. While LED is on, the desired value is adjusted by turning the multifunc-
tional knob.
Up-Slope Time LED
İs selected by pushing multifunctional knob. While LED is on, the desired value is adjusted by turning the multifunc-
tional knob.
Down-Slope Time LED
İs selected by pushing multifunctional knob. While LED is on, the desired value is adjusted by turning the multifunc-
tional knob.
Base Current LED
İs selected by pushing multifunctional knob. While LED is on, the desired value is adjusted by turning the multifunc-
tional knob.
Final Current LED
İs selected by pushing multifunctional knob. While LED is on, the desired value is adjusted by turning the multifunc-
tional knob.
Starting Current LED
İs selected by pushing multifunctional knob. While LED is on, the desired value is adjusted by turning the multifunc-
tional knob.
Spot Welding LED
Lights while the torch trigger is pushed in spot welding mode.
Main Current LED
İs selected by pushing multifunctional knob. While LED is on, the desired value is adjusted by turning the multifunc-
tional knob.
Post Gas-Flow Time LED
İs selected by pushing multifunctional knob. While LED is on, the desired value is adjusted by turning the multifunc-
tional knob.
Pulse Frequency Adjustment LED
İs selected by pushing multifunctional knob. While LED is on, the desired value is adjusted by turning the multifunc-
tional knob.
Thermal Error LED
Lights when machine is overheated.
Operation
