EN
www.magmaweld.com
Monotig 160ip
11
USER MANUAL | KULLANIM KILAVUZU
TECHNICAL INFORMATION
1.1 General Information
Figure 1: MONOTİG 160ip
1-
Line Cable Inlet
6-
Earth Cable and Welding Cable Socket (+)
2-
Power Switch
7-
Torch Control Connections
3-
Gas Inlet
8-
Control Panel
4-
Gas Outlet
9-
Multifunctional Adjustment Knob
5-
Earth Cable and Welding Cable Socket (-)
10-
Thermic / Error LED
1.2 Machine Components
Monotig 160ip is an inverter type portable, mono-phase Pulsed DC TIG/MMA welding machine designed for TIG welding of all kinds of thin metal
sheets except aluminum & for MMA welding of all kinds of stick electrodes up to 4 mm.
Enhanced professional TIG controls such as, HF start, Touch-Lift, pre-gas, up-slope, pulse, down-slope, post-gas & crater filling are present.
Up to 10 complete jobs can be stored in the memory and run when it is necessary.
Current, time and program settings can easily be monitored by digital displays.
Monotig 160ip proved well that it can work between 160 to 240 V 50/60 Hz line voltages. Therefore this machine is quite immune to mains voltage
fluctuations and perfectly welds with generator-sets.
Monotig 160ip can also be used with long welding cables up to 25 mt.
The machine is fan cooled any thermally protected against over heating.
Technical Information
