Monotig 160ip
EN
www.magmaweld.com
16
USER MANUAL | KULLANIM KILAVUZU
TIG torch connection via CX79 TIG torch adaptor
• Thread the nut
(16)
of the torch through the plastic body
(17)
and screw to the torch plug
(18)
tightly. Then place the torch plug
(18)
into the
plastic body
(17)
.
• Thread the L shape gas hose adapter
(19)
through the hole on plastic body and screw it to the socket
(18)
tightly.
• Connect the gas hose
(20)
to the elbow union
(19)
wiht the clamp tightly.
• Install the connector pins
(22)
to the control cables
(21)
of the torch.
• Connect the TIG torch plug that you’ve prepared to the negative welding socket
(5)
tightly.
• Screw the gas hose of the torch to the gas outlet
(4)
.
• Insert the connector pins
(17)
to the torch control connections
(7)
.
• In case of using water cooling unit, connect the water hoses of the water-cooled torch to the water cooling unit.
• Connect the earth cable plug
(23)
to the positive welding socket
(6)
tightly.
• To increase the quality of the welding, connect the earth clamp
(24)
tightly to the work-piece as close as possible to the welding area.
2.3.3 Preparing the Torch Connections
2.3.4 Torch Connections
2.3.5 Earth Clamp Connections
Figure 4: Mounting the Torch Plug and the Torch
Figure 5: TIG Welding Connections
Installation
