Magmaweld D 500 TW DC PULSE, User Manual

Page: 26 / 132

EN
26
www.magmaweld.com USER MANUAL | MANUEL D’UTILISATION | РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ | KULLANIM KILAVUZU
ID 500 TW DC PULSE
3.3 Machine Features
Thermal Protection
• Double protection to prevent overheating and damage of your machine. The intelligent processor digitally
performs temperature control whereas a second protection for the machine will be performed manually.
• If the Igbt block rises above 80 degrees, the red LED lights and the error code will be displayed.
Lift TIG
• Lift TIG function allows TIG to be made without damaging the Tungsten tip while rubbing it.
Operation With Generators
• Suitable for operation with generators. The kVA operating value should be determined by referring to the technical
specifications.
Smart Fan Control
• You can tell if the fan is running by the fan sound at first power-up.
• If the fan sound is comes when the machine is turned on, this means the fan is running. After a time machine exits
from test mode.
• When the ambient temperature is below 30 degrees, the fan does not start and will be in standby mode.
This prevents dust or metal parts from entering the machine.
Program Memory
• 100 programs can be stored in the memory. You can record 100 programs between 0-99.
• The changes will be saved. Press the P key to switch between programs.
Voltage Protection
• Tolerates voltage fluctuations.
• Protection feature against false voltage and oscillating input voltage.
• After the ambient conditions have returned to normal, the machine functions will also be activated.
Protection
• If the mains voltage is out of tolerance, an error code is given and a warning led is displayed.
• Machine functions will be re-activated when the phases are corrected.
Antistick
• Anti-Stick feature to prevent electrode sticking
Operation