Magmaweld D 500 TW DC PULSE, User Manual

Page: 24 / 132

EN
24
www.magmaweld.com USER MANUAL | MANUEL D’UTILISATION | РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ | KULLANIM KILAVUZU
ID 500 TW DC PULSE
6- Adjustment Button
TIG Mode;
• With its 100 program memory feature, it can save your parameter settings. You can recall them as
required by your work type. By this means, each time you change the work, you will not have to set
parameters; the production standard will be preserved. Whichever memory (job) number is
selected, all settings will automatically be saved in that number.
• Change the program number for different parameter entries.
• The display above the program button shows which parameter you have changed in the program.
• There are 100 programs available between 0-99.
• You can switch to the other program by pressing the program button once, if you press and hold, you
can switch between the programs quickly.
MMA Mode;
• (U) When you want to see the welding output voltage, you can see the voltage unit by pressing the
button once. You can switch to the ampere unit by re-pressing the button and display the current
value (A) on the digital display.
7- Program Memory
8- Digital Display
The adjustment knob allows current setting in all welding methods and parameter changes in all
functions. The setting will be made by turning right and left and the set values will be displayed on the
digital display.
The set welding current, parameter values and error codes can be monitored visually on the digital
display.
Operation