20
7.2. Cycle fi xing
Use the supplied cycle fi xing to secure the camcorder to a frame of a cycle,
motorbike or another rod. Open the fi xing by partially undoing both bolts and
turning away the bottom section. Place the top section around a suitable part of
the frame and replace the bottom section. Tighten both bolts on the fi xing.
Ensure that the cycle fi xing is attached to a point of the cycle or motorbike least
exposed to shocks and vibrations during riding.
7.3. Helmet fi xing
The helmet fi xing can be used to attach the camcorder to smooth surfaces, such
as helmets, surfboards or skis. Stick one of the self-adhesive pads to the bottom of
the helmet fi xing and stick the fi xing onto the cleaned surface.
Note:
• Attention: The helmet fi xing is only suitable up to a speed of 50 Km/h !
For faster rides, such as on a motorcycle, there must to be used the cycle fi xing.