![background image](http://html.mh-extra.com/html/maginon/action-sports-hd-1/action-sports-hd-1_instruction-manual_690992011.webp)
11
4.6. Inserting and charging the battery
Insert battery into camcorder as shown and push until it clicks into position
(see left image).
To charge battery, connect USB cable to USB connection of camcorder. The USB
cable can be connected to the mains using the supplied USB power adapter or
can be directly connected to a standard USB port of your computer.
During charging, the yellow LED on top of the camcorder is constantly illuminated.
As soon as the battery is fully charged, the LED switches off .
4.7. Use and applying of sealing caps
When the camcorder is used for video recording it is recommended to position
one of the supplied sealing caps on the rear of the camcorder. Use the
sealing cap
with microphone opening
to record videos with a good sound quality. In contrast
to the spray water protection cover, the sealing cap allows the sound to directly
enter the microphone, located above the mode switch. Ambient noises are
consequently not attenuated.
Note:
• The fi rst charging of the battery can last up to 6 hours. You can, however, disconnect the camcorder
from the power source as soon as the LED switches off .
• Up to 125 minutes can be recorded with one battery charge.