background image

7

Injuries and material damage

 

Only place camcorder on sturdy surfaces.

 The camcorder could otherwise fall  

  or topple over, causing damage or injury. 

 

 Do not operate camcorder whilst running or driving. 

You could fall or cause a 

traffic accident.

 

 

Only use USB power adaptor specified for the camcorder. 

No liability shall be 

accepted for damage caused by the use of an incorrect USB power adaptor.

 

 The 230V socket used for the power supply must be accessible at all times so 

that the power supply can be quickly disconnected from the mains 

if necessary.

 

 Ensure adequate ventilation and do not cover the power supply (not supplied) 

to prevent overheating.

 

 Do not place any open ignition sources, such as lit candles onto or 

close to the device.

 

 Damage to the electronics, display or lens caused by external influences, such 

as electric shocks, falls or others are not covered by the warranty and shall thus 

be charged for.

 

 

Do not drop or bump camcorder

 and always handle with due care as the

camcorder could otherwise be damaged.

Summary of Contents for Action Sports HD 1































Reviews: