Page 9
2.4.2. Pebble Effect Layout
The fire is supplied with ceramic pebble sets
as follows:-
Qty
Large Pebbles (A, B & K) 9
Medium Pebbles (C & D) 6
Small Pebbles (G)
3
Flat Pebbles (H)
4
Front Pebbles (E & J)
6
Aeration Tubes
2
½ Aeration Tubes
1
NOTE: When placing pebbles on the tray
ensure the lettering on them is facing down
and into the fire. After every step of pebble
laying ensure that they are stable.
Proceed with the pebble layout as follows:-
1. Unpack the
aeration tubes,
pebbles
H,
E & J
and place them on the tray as
shown in
Figure 11
ensuring that the
port holes and the cross ignition slot
remain clear. Note that the aeration
tubes should be placed on their back,
with the legs facing up ensuring that
none of the port holes are blocked.
2. Place pebbles C & D in position as
shown in Figure 12.
3. Place pebbles
A, B, C &
in position as
shown in
Figure 13
.
4. Place pebbles
A, G & K
in
Figure 14
and
Figure 15
to complete the fuel effect
layout.
5. Small adjustments to the top layer may
be made to alter the flame pattern if
desired flame after the fire has been
turned on. A small pair of tongs should
be used for this.
6. It is recommended that the pebbles be
left alone once the desired flame pattern
has been achieved.
Constant
movement of the pebbles causes the
pebbles to disintegrate and/or cause
discolouration
.
WARNING:
Do not touch the
fire when it is alight. The fire
will remain very hot for a while
after extinguishing.
Figure 11
H
H
H
C
D
C
Figure 12
H
H
H
B
B
A
A
A
D
B
D
C
Figure 13
H
H
H
K
K
A
Figure 14
H
H
H
G
G
G
Figure 15
