Magic FLEX FLK02 FLX1.1, User Manual

Page: 7 / 63

3
MAGICMOTORSPORT AND ITS AFFILIATES DO NOT PROVIDE ANY KIND OF WARRANTY ON
ANY EVENTUAL WEAR AND TEAR OF THE ENGINE AND/OR OTHER MECHANICAL AND/OR
ELECTRICAL PARTS OF THE VEHICLE, NOR DOES IT ASSUME RESPONSIBILITY OF THE
USE OF THE PRODUCT IN ACCORDANCE WITH THE REGULATIONS IMPOSED BY OTHER
COUNTRIES (E.G. BUT NOT LIMITED TO, ANTI-POLLUTION REGULATIONS).
2. TERMS AND CONDITIONS
The terms and conditions of use listed below are automatically deemed to be
understood, acknowledged and accepted by users registered to the MMS Helpdesk.
The use of the interface implicates the acceptance of the Terms of Service in the
Product Warranty and Software License section in the MMS Helpdesk on behalf of
the user.
The terms and conditions of use
Safety measures for the operation of FLEX
In the event of a Repair Request for the tools, the user must contact MAGICMOTORSPORT
exclusively.
• FLEX and its accessories are intended for professional use.
• FLEX is intended solely for use in the modification of competition vehicles or for use
in racing events off of public roads.
• FLEX gives the user access to the engine management parameters. The modification
and/or recalibration of these parameters could somehow make the vehicle inconsistent
with the requirements, standards, and directives of certain countries in terms of power,
speed and emissions. In the case of extreme modifications to the engine management
system, atypical or greater wear of the mechanical components of the vehicle may be
experienced, thus causing the loss of the warranty provided by the manufacturer or the
reseller of the vehicle. The highest level of professionalism and caution is necessary
during operations on the operating parameters of engine management.
• The product and its associated accessories must be used only after the consultation
of this manual and the correlative operating manuals on the MMS Helpdesk.