13
AS IT IS IMPOSSIBLE TO DESCRIBE ALL UNEXECUTABLE OPERATIONS,
IT IS UNDERSTOOD THAT ALL OTHER OPERATIONS NOT EXPLICITLY
INDICATED IN THE MANUAL SUPPLIED WITH FLEX ARE TO BE
CONSIDERED NOT FEASIBLE.
DISCONNECT THE PROGRAMMING TOOL FROM THE POWER SUPPLY
BEFORE PERFORMING ANY CLEANING OR PHYSICAL MAINTENANCE.
PROBLEMS
If any unforeseen and dangerous anomaly occurs during the power on phase and use
of the FLEX programming tool, it is recommended to observe the following procedure:
•
Turn off the programming tool
•
Disconnect the programming tool from its power supply
•
Immediately contact the manufacturer’s authorized assistance
In the event that unforeseen electromagnetic anomalies occur after powering on
the FLEX programming tool, such as the inability to communicate via phones or
smartphones, it is recommended to observe the following procedure:
•
Switch off FLEX
•
Contact technical assistance immediately.
ACCESS TO THE INTERNAL PARTS OF THE PROGRAMMING TOOL IS FORBIDDEN. NO
ORDINARY MAINTENANCE REQUIRES THE DISASSEMBLING OF THE PROGRAMMING TOOL
CASE. MAINTENANCE ON THE INTERNAL PARTS MUST BE PERFORMED EXCLUSIVELY BY A
TECHNICIAN INDICATED BY THE MANUFACTURER.
ALL MECHANICAL, ELECTRICAL OR ELECTRONIC INTERVENTIONS, ORDINARY OR
EXTRAORDINARY, MUST BE CARRIED OUT BY SPECIALIZED AND AUTHORIZED
PERSONNEL.
Summary of Contents for FLEX FLK02 FLX1.1
