2
Tour of Magic TV™
17
2
Tour of Magic TV™
16
Power On/Off Switch. Turn Magic TV™ on using this switch.
Magic TV™ consumes very little power on Standby. It is therefore
unnecessary to turn Magic TV™ off with this switch during normal operation.
DC Power In. The included 100-240V AC auto-ranging power
adapter should be attached here. Please see “Safety Information”
before proceeding.
Ventilation holes. It is important that all the ventilation holes in
Magic TV™ are kept clear, in order for hot air to escape.
HDMI. (Connects to a TV, AV receiver or home theatre system.) HDMI
provides a pure digital connection for high definition video and audio
all in one cable.
Composite Video. (Connects to a TV, AV receiver, VCR, DVD recorder
or home theatre system.) Composite is the most basic of video connections
and is Standard Definition only.
S-Video. (Connects to a TV, AV receiver, VCR, DVD recorder or home
theatre system.) S-Video offers a higher quality signal than Composite for
compatible equipment but is Standard Definition only.
Component Video (YPbPr). (Connects to a TV, AV receiver or home
theatre system.) Component provides an excellent quality HD and SD
analogue video connection.
Coaxial Digital Audio. (Connects to an AV receiver or home cinema
system.) If you are not using the audio over HDMI, then this connection
will provide multi-channel digital audio to your surround sound system.
Optical Digital Audio. (Connects to an AV receiver or home cinema
system.) If you are not using the audio over HDMI, then this connection
will provide multi-channel digital audio to your surround sound system.
Analogue Stereo Audio. (Connects to a TV, VCR or DVD
recorder.) Connect the left and right audio cables (included) for
analogue stereo sound.
USB x2.
USB devices can be attached and used for expanding
storage space (see
section 3.5
), importing and exporting recordings
(see
section 6.8
) and also for Magic TV™ firmware upgrades
(see
section 9.2
).
Ethernet Network. Use this connection to link Magic TV™ to your
home network. This may be needed for some of the Interactive Services.
Antenna In. A coaxial RF cable needs to be connected to this input to
allow Magic TV™ to receive the new DTT signals.
Loop Out (Antenna Out). Connect the included Aerial/Antenna
extension cable from this output to another device if you wish to retain
analogue TV reception (on your TV for example).
14
13
12
11
10
9
8
7
6
5
4
3
2
1
2.2
Rear Panel
S-Video
HDTV Tuner
Ant.
In
Loop
Out
Network
USB
HDMI
YPbPr
Audio
Digital Audio
L
R
Composite
Video
Pb
Pr
Y
12V DC
ON/OFF
2
1
6
5
7 8 9 10
11
12
13
14
3
4
