Magic TV MTV3700TD Owner'S Manual Download Page 42

11

Support & Warranty

84

85

Support & Warranty

Product Support

Magic TV™ is designed to provide you with many years of viewing pleasure.  

If for any reason you encounter a problem with your unit, please follow  

these steps:
1. Carefully follow the instructions shown in this manual.
2.  Refer to section 10: Troubleshooting to try and rectify the problem.
3.  If you still cannot get the information you need, please contact our support 

team using the following details:

Email: [email protected]
Tel: (02) 9618-1016
Caution: Under NO circumstances should you attempt to repair or modify  

Magic TV™ as this could expose you to electrical shock and/or severely  

damage Magic TV™.

Warranty Conditions

1.  Where required by Magic TV only the original invoice/receipt issued by the dealer  

will be accepted as proof of purchase.

2.  Magic TV may reject warranty claims on equipment which it believes to be illegally 

acquired or when the “owner” is unable to provide proof of purchase or where security 

labels or serial numbers have been tampered with or removed.

3.  The warranty covers only defects in the material and workmanship of the product for  

a period of 12 months from the date of original purchase.

4.  This warranty is on “Return to Base” basis. The owner is responsible for the delivery 

of the equipment to the point of purchase and for collecting the repaired or replaced 

equipment from the same location.

5.  The warranty is void if failures arise as a result of any of the following. i) Abuse, 

misuse, physical impact, normal wear and tear. ii) Alteration or repairs carried out with 

out written authorization from Magic TV. iii) Upgrades that are not registered by Magic 

TV iv) Operating or maintained other than in accordance with the manual supplied.

6.  This equipment will not be considered defective as a result to incompatibility  

with other equipment or accessories other than the ones supplied with the unit  

at the time of purchase.

7.  This unit should be returned in its original carton and protective packaging or 

alternatively in a packing suitable to prevent damage. Magic TV will not accept any 

responsibility for goods damaged whilst the they are in transit.

8.  Repair or replacement under the terms of this warranty does not give the right to 

extension or a beginning of a new warranty period. Repairs or replacements may be 

carried out with functionally equivalent reconditioned parts or equivalent part. Parts that 

have been replaced become the property of Magic TV.

9.  The customer acknowledges that no promise representation or undertaking has been 

given by Magic TV or its dealer in relation to equipment other than as contained in  

this warranty.

10.  A service charge will apply if the fault is not covered within the conditions of this 

warranty or if there is no fault found. The charge will be based on the current  

market rate.

11.  Magic TV is not liable for any other loss other than the unit itself.
12.  Nothing contained in this warranty shall be read or applied so as to affect the right of 

the consumer in relation to the provisions of the trade practices act or other statutory 

rights provided by legislation of the state or territory. In the absence of applicable 

legislation this warranty will be purchaser’s sole and exclusive remedy and neither 

Magic TV nor its distributors or agents shall be liable for any incidental or consequential 

damages for breach of any express or implied warranty of this equipment.

For further warranty information or to make a claim please contact Digital Trading 

Co. by phone on (02) 9618-1016 or via email [email protected] or 

[email protected] 

Limitation of Liability (for all customers)

BOTH YOURS AND PIXEL MAGIC SYSTEMS’ LIABILITY SHALL BE LIMITED TO THE PRICE PAID FOR 
PRODUCT. IN NO EVENT SHALL EITHER YOU OR PIXEL MAGIC SYSTEMS LTD. BE LIABLE TO THE 
OTHER FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING 
FROM PERFORMANCE OR FAILURE TO PERFORM UNDER THIS AGREEMENT, OR USE OF ANY 
GOODS OR SERVICE SOLD PURSUANT HERETO, WHETHER DUE TO A BREACH OF CONTRACT, 
BREACH OF WARRANTY, NEGLIGENCE, OR OTHERWISE. NEITHER YOU NOR PIXEL MAGIC SYSTEMS 
LTD. SHALL HAVE ANY LIABILITY TO THE OTHER FOR INDIRECT OR PUNITIVE DAMAGES, OR FOR 
ANY CLAIM BY ANY THIRD PARTY EXCEPT AS EXPRESSLY PROVIDED HEREIN.

Software License 

This product incorporates the following software: 
(1) the software developed independently by or for Pixel Magic Systems Ltd., 
(2)  the software owned by third party and licensed to Pixel Magic Systems Ltd., 
(3)  the software licensed under the GNU General Public License,  

Version 2 (GPL v2), 

(4)  the software licensed under the GNU LESSER General Public License,  

Version 2 (LGPL v2) and/or, 

(5)  open sourced software other than the software licensed under the  

GPL v2 and/or LGPL v2 

For the software categorized as (3) and (4), please refer to the terms and conditions of 

GPL v2 and LGPL v2, as the case may be at http://www.gnu.org/licenses/old-licenses/

gpl-2.0.html and http://www.gnu.org/licenses/old-licenses/lgpl-2.0.html
Please refer to this link for the detail software and package used. 
http://www.magictv.com/downloads/magictv_opensource.txt 
The GPL/LGPL software is distributed in the hope that it will be useful, but WITHOUT ANY 

WARRANTY, without even the implied warranty of MERCHANTABILITY or FITNESS FOR A 

PARTICULAR PURPOSE. 
At least three (3) years from delivery of products, Pixel Magic Systems will give to any 

third party who contact us at the contact information provided below, for a charge no 

more than our cost of physically performing source code distribution, a complete machine-

readable copy of the corresponding source code covered under GPL v2/LGPL v2. 
Contact Information: [email protected]

Dolby Digital: 

Manufactured under license from Dolby Laboratories.  

Dolby and the double-D symbol are trademarks of Dolby Laboratories.

11

Support & Warranty

Summary of Contents for MTV3700TD











































Reviews: