INITIAL SETUP, INSTALLATION, AND ASSEMBLY:
8. CARTRIDGE DOWNFORCE (WEIGHT):
To ensure the best audio quality and extend the life of your
cartridge and records, the downforce must be adjusted.
Please refer to the cartridge user manual to read the
cartridge recommended downforce.
To adjust the downforce, please use the digital scale included with
your new turntable.
7.1 Place the digital scale turned off on the platter, turn it on
gently, and wait 2 seconds, allowing the scale to tare.
7.2 Using the tonearm lifter, move the tonearm until the stylus tip
rests on the black dot in the center of the measuring area, and
lower the tonearm to allow the scale to measure the downforce.
7.3 Using the tonearm lifter, raise the tonearm, and adjust the
downforce by gently pushing or pulling the eccentric
counterweight forward and backward.
7.4 Pushing the counterweight will reduce downforce, and pulling
the counterweight will add more downforce, make small and
gentle movements, use the tonearm lifter, place the stylus on the
scale and take readings until the downforce recommended by the
cartridge manufacturer is reached.
11
Summary of Contents for TT10
Page 1: ...TT 10Turntable User Manual...
