INITIAL SETUP, INSTALLATION, AND ASSEMBLY:
PLATTER
SPINDLE
CERAMIC BALL
In the following manual, we will cover all the basics needed to set
up your new T3 turntable.
1. INSTALLATION REQUIREMENTS:
It is imperative to place the turntable on a firm, non-vibrating,
horizontally leveled, and solid support.
2. ASSEMBLING THE BEARING AND PLATTER:
2.1:
Carefully insert the ball bearing into the spindle hole. The ball
bearing is made from ceramic. If the platter is dropped too hard
when placing it, the ball bearing can break.
2.2:
Insert the spindle into the hole carefully, allowing the air to
flow outside of the bearing structure. The bearing has been
pre-lubricated from the factory, and it should be cleaned and
lubricated with thin oil after every 100 hours of use.
2.3:
Carefully place the platter on the spindle. DO NOT twist, drop
or force the platter into position; this could damage the bearing
and will void the warranty.
In the next image, we can see the correct order in which all the
pieces should be assembled.
The platter should spin freely after everything is in place.
5
SPINDLE HOLE ON
TURNTABLE BASE
Summary of Contents for TT10
Page 1: ...TT 10Turntable User Manual...
