INITIAL SETUP, INSTALLATION, AND ASSEMBLY:
10. DRIVE BELT PLACEMENT:
10.1 Start by gently placing the drive belt on the grooves of the
motor axis and then on the grooves of the platter.
Slowly spin the platter until the turntable drive belt is set on both
the platter and the motor axis grooves.
The top grooves on the motor axis are for 33 RPM, and the lower
grooves are for 45 RPM.
13
sssss
sssss
11. ANTI-SKATE WEIGHT PLACEMENT:
Place the loop of the weight filament in the hook of the
anti-skating device on the tonearm base.
Place the filament over the anti-skating weight adjustment arm,
and let the weight hang behind it.
Every mark on the anti-skating weight adjustment arm is
approximate to 0.5g.
Adjust the weight, so it matches the weight of your pickup
cartridge.
Distance from mark to mark = 0.5g
Eccentric Counterweight
Anti-Skate Weight
Summary of Contents for TT10
Page 1: ...TT 10Turntable User Manual...
