MADRIX PLEXUS, User Manual

Page: 143 / 299

MADRIX PLEXUS User Manual (English) 143
© 2013 inoage GmbH
The MADRIX PLEXUS may display 'Standby'. If the MADRIX PLEXUS is in standby mode, the device
does not receive enough power from the power supply in use or the USB port. Possibly the
computer to which the device is connected might simply be in standby mode, too.
Exception-Trace
Should an error occur on the device (an unlikely event), the so-called Exception-Trace will be
displayed on the PLEXUS display. It functions as an error message to be analyzed by the
manufacturer.
If such an Exception-Trace occurs, please make a picture of it and send the picture to your dealer
or the manufacturer. Thank you!
MADRIX PLEXUS Updater (Extra Tool)
Along with MADRIX a separate tool for the MADRIX PLEXUS is provided, called 'MADRIX PLEXUS
Updater'.
You can use this tool to update the firmware or to reset the device to its factory default settings.
For more information, see MADRIX PLEXUS Updater (Extra Tool) .
Hard Reset
Important Information
The following instructions is to be seen with great caution!
It is only included for your information until you might need it.
Perform a hard reset only when really needed!
There are two button combinations in order to perform hard resets.