MADRIX PLEXUS, User Manual

Page: 141 / 299

MADRIX PLEXUS User Manual (English) 141
© 2013 inoage GmbH
Blinking green
Reading or writing data from or to the SD card.
The interface works correctly.
Fading between
green + red
SD card is inserted.
The interface works; No data is read or written.
Manually Installing The PLEXUS Driver
When Windows indicates that the hardware driver has not been installed correctly, please
manually update the driver.
In Windows Vista or Windows 7 , click 'Start' 'Control Panel' 'System and Security' (or just
'System') 'Device Manager'. Right-click on 'MADRIX PLEXUS' in the section 'Other devices' and
choose 'Update Driver Software…'. Then, navigate to the driver location on your harddisk:
'C:\Program Files (x86)\MADRIX\madrixusbdriver\plexus\windows'
In Windows XP , click 'Start' 'Settings' 'Control Panel' 'Systems' tab 'Hardware' 'Device
Manager'. Right-click on 'MADRIX PLEXUS' in the section 'Other devices' and choose 'Update Driver
Software…'. Then, navigate to the driver location on your harddisk:
'C:\Program Files\MADRIX\madrixusbdriver\plexus\windows'
Important Note
If new drivers and a new firmware are available for the MADRIX PLEXUS, please always
update the firmware first and the drivers second!
Hardware Model/Type
The manufacturer may update the hardware design of the device for new units. Please note the
following:
Hardware model V1.6 ('Model: PLEXUS V1.6') can be updated using firmware version 1.07.4369
or higher.