macnil GT ALARM GT1006CB, Installation Manual

Page: 48 / 77

21
20 - GT949 RAPID TEST
1 - The system must be disarmed.
2 - Put the dip-switch 1 in ON. You should hear 1 long beep and see the GREEN LED always on.
3 - Pressing the OFF button of the remote control results in a GREEN LED flash and a mid-length beep.
A low battery on the remote control, result in a RED LED flash and a long beep.
4 - Pressing the sensor TEST button results in 3 GREEN LED flashes and 3 mid-length beeps. A low
battery on the remote control, result in a 3 RED LED flashes and a long beep.
Note: To exit RAPID TEST mode, switch OFF the dip-switch 1 and the system beeps long.
21 - DISABLING ACOUSTIC SIGNALLING GT949
1 - The system must be disarmed.
2 – Switch ON the dip-switch 4.
En