macnil GT ALARM GT1006CB, Installation Manual

Page: 39 / 77

11 – BLINKER CONTROL SCHEME
- The connection showed below should be done only if Function No. 5 SINGLE WIRE
BLINKER COMMAND is ENABLED.
12 – HORN CONTROL DIAGRAM
13 – SELECTABLE SYSTEM FUNCTIONS
The system allows to select some functions
through a 10-way dip switch located in the
back of the unit. Selection can only be made
when the system is switched off.
Note: After 30 minutes dip switches are
deactivated. To activate them, turn on the
ignition of the vehicle or close and open the
vehicle via the original remote control.
12
En