995086
–
Rev B
Page 23 of 32
Refitting / Replacement
Refitting is a reversal of the removal process noting the following points:
•
When refitting the hub, if required, grease the hub using the recommended grease (Morris Grease
–
K42EP multi-purpose).
•
When inserting the hub back into the chassis, make sure the overspeed cam is facing same face as the
overspeed cam screws.
•
Make sure to refit the overspeed cam screws into the chassis.
•
Test the overspeed cam is working by flicking the cam with an Allen Key through the slot in the chassis.
(See image below)
•
Refer to the lift tape refitting guide for further details.
