995086
–
Rev B
Page 12 of 32
8
Removal and Replacement
This section will cover the details of how to remove, refit and replace all serviceable parts of the portable lift.
Ensure to read and understand each step thoroughly before removing any component from the portable lift.
Ideally, the portable lift should be removed from the track and placed on a work bench before any dismantling.
But servicing can be done with the portable lift remaining within the track system. (Depending on the service
required).
Unless stated otherwise, all images refer to a Mackworth CPP with a standard trolley assembly (Track Type 1).
Where necessary, additional images for alternative track and portable lift types have been included.
Before carrying out any dismantling of the portable lift, the power should be turned off using the red pull cord.
8 . 1
Side Covers
This section will cover the details of how to remove, refit and replace the portable lift side covers.
Removal
1.
Use a slotted screwdriver to remove the two brass screws from the rear cover of the portable lift.
2.
Gently remove the cover from the portable lift.
3.
Rotate the portable lift 180° and gently rest the portable lift on the lift motor.
