995086
–
Rev B
Page 20 of 32
8 . 6
Lift Tape
This section will cover the details of how to remove, refit and replace the Lift Tape.
Removal
1.
Remove the side covers from the portable lift. (Refer to section 8.1)
2.
Remove the PCB from the portable lift. (Refer to section 8.4)
3.
Remove the top QRS hook from the portable lift. (Refer to section 8.13)
4.
Remove the top cover from the portable lift. (Refer to section 8.2)
5.
Remove the motors from the portable lift. (Refer to section 8.5)
6.
Pull the lift tape from the portable lift until it has fully unwound from the hub.
7.
Using a small slotted screwdriver, remove the 8mm e-clip from the strap pin. Be careful not to lose the
e-clip.
8.
Slide the strap pin out of the chassis until 47mm of the pin is visible, this allows lift tape removal without
displacing the hub.
9.
Gently pull the lift tape through the limit switches to remove from the portable lift.
47mm
