995086
–
Rev B
Page 30 of 32
8 . 13
QRS Hooks
8 . 13 . 1
Top QRS Hook
This section will cover the details of how to remove, refit and replace the Top QRS Hook.
Removal
1.
Using a 2mm Allen Key, loosen the grub screw from the hook until it releases the pin. The grub screw
doesn’t need to be fully removed.
2.
Slide the pin out from the lift tape to release the QRS Hook.
Refitting / Replacement
Refitting is a reversal of the removal process noting the following points:
•
Ensure that the hole in the pin aligns with the grub screw.
•
Care must be taken not to damage the lift tape when inserting the pin through the loop.
