33
Owner’s Manual
Owner’
s Manual
Figure 6-1 TT Control software screen
Ch 6: Touchscreen and TT Control
6.1 TT Control Conventions
The TT control software expands the TT24’s control
possibilities by providing:
• Remote control of all functions from a PC connect-
ed via USB
• Improved metering and graphics than can be dis-
played on the Touchscreen
• Remote Venue/Preset management and con-
sole–>console backup/restore
• Console firmware upgrade capability
• Detailed Snapshot management
Most of the TT24’s configuration occurs on the Touch-
screen and/or the TT control software. This section
discusses the general conventions for both interfaces.
Since the TT control software screens mirror and elabo-
rate the Touchscreens, they will not be discussed except
to define their functional differences.
In both the Touchscreen and TT control, the
Ctrl
key
has a useful function: Press and hold the
Ctrl
key and
adjust any TT control parameter to restore its default
value. For example, press and hold
Ctrl
and adjust a
Pan knob to set it to the center position, or adjust an EQ
Gain knob to set it to 0 dB.
NOTE:
The Touchscreen and TT control screens
can be synchronized, so displaying a new
screen on one displays the corresponding
screen on the other, or independent, allowing
two engineers simultaneous access to the
console. They are synchronized by default. See
page 46 to toggle this setting.
