18
TT24 DIGITAL LIVE CONSOLE
TT24 DIGIT
AL LIVE C
ONS
OLE
when viewing solo levels. This, along with the
RUDE
SOLO
LED, indicates that the meter is displaying a
soloed signal.
When all solos are cleared either individually or by
pressing the global
CLEAR SOLO
button, the
RUDE
SOLO
LED stops flashing and the three meters return to
their normal operation.
3.5 UTILITY Area
At the top of the console, the UTILITY area contains
TALKBACK
,
MONITOR
, and
PHONES
controls.
Figure 3-7 UTILITY area
OL
SIG
U
OFF MAX
MONITOR
U
OFF MAX
PHONES
TALKBACK
U
+60dB
20
30
40
UTILITY
3.5.1 TALKBACK
The
TALKBACK
gain knob controls the input gain
of the rear panel
TALKBACK
microphone input. The
gain range is 0–60 dB. A green SIG (signal) LED and a
red OL (overload) LED behave identically to those on
the channel strips (see page 12). The talkback signal
is routed via the TALKBACK Touchscreen, accessed by
pressing
UTIL
and then touching the
TALK-
BACK
button. The Talkback signal can be
routed to any Matrix or Aux bus.
3.5.2 MONITOR
The
MONITOR
gain knob controls the level of
the
Left
,
Right
, and
Mono
monitor outputs. The
gain range is from
off
to +10 dB. These out-
puts contain the left, right, and monitor signal
selected in the MON. SOURCE Touchscreen, ac-
cessed by pressing
UTIL
and then touching the
MONITOR SOURCE
button. When a solo button
is pressed, the solo signal is sent to the monitor
outputs instead.
3.5.3 PHONES
The
PHONES
gain knob controls the head-
phone output level, a stereo output identical to
the Monitor
L/R
outputs. The
PHONES
level is
independent of the
MONITOR
gain control.
3.6 Snapshots
The TT24 includes a robust snapshot feature that cap-
tures and restores the state of the console. The console
snapshot controls are in the top-right of the console
beside the QuickMix buttons (Figure 3-5). These fast
and intuitive surface controls can store/recall up to 99
snapshots. See “Appendix B: Snapshot Parameters Saved”
for a list of all the TT24 parameters saved in a snapshot.
More elaborate snapshot functionality is available on
the SNAPSHOTS Touchscreen (i.e., channel and param-
eter filtering; see page 42). This section discusses only
the console’s surface controls.
The
SNAPSHOTS
LCD displays the selected snapshot
(bottom-right in Figure 3-6). Use the up/down arrow
buttons to scroll through existing snapshots. The current
snapshot’s number is displayed in the
SNAPSHOTS
LCD
field next to the Touchscreen. The snapshot number
blinks in the
SNAPSHOTS
display before being recalled.
Press and hold the snapshot up or down arrows to
step through three numbers and then begin increasing
or decreasing in increments of fives to allow for faster
access to a desired snapshot.
Press
RECALL
to recall the blinking snapshot number
displayed in the LCD. When the
RECALL
button is
pressed, the snapshot parameters are loaded into the
TT24 and the LCD lights continuously. Press
STORE
to save the state of the console to the current snapshot
(the last snapshot recalled).
Figure 3-8 Bank Select,
Group, Aux and Master
sections
GROUP ASSIGN/SELECT
MASTER
MUTE
1
5
SELECT
SOLO
MUTE
2
6
SELECT
SOLO
MUTE
3
7
SELECT
SOLO
MUTE
4
8
SELECT
SOLO
CTR/
MONO
L/R
SELECT
Group Assign/Select buttons
Master Center/Mono Assign button
Master Left/Right Assign button
Master Select button
Group Select buttons
Group Faders
p
Group Mute buttons
Master Fader
Group Solo buttons
