49
Owner’s Manual
Owner’
s Manual
6.14 Utility
Figure 6-32 UTILITY MENU SELECTION
Press the
UTIL
QuickMix button to open the UTILITY
MENU SELECTION Touchscreen. Touch the
MONI-
TOR SOURCE
,
STEREO INPUT ASSIGN
,
TALKBACK
,
METERING
,
TEST TONES
, and
USER BANK
buttons
to configure those attributes.
6.14.1 MONITOR SOURCE
Figure 6-33 UTILITY MONITOR SOURCE
The MONITOR SOURCE Touchscreen assigns a source
for the monitor outputs and the headphones. The moni-
tor analog gain controls are located in the UTILITY
area (see page 18). Choose among these sources:
L/R
,
C/MONO
,
DIGITAL
,
TAPE/CD A
, or
TAPE/CD B
.
The
L
,
R
, and
C
meters mirror the hardware meters
and display the
L
,
R
, and
C/M
Monitor outputs. Each
meter has an overload LED at the top.
The
SOLO LEVEL
adjusts the level of the solo group.
It varies ±15 dB in 0.1 dB increments and its default
level is 0 dB. The
RUDE SOLO
LED lights when a chan-
nel is soloed.
6.13.2 TALKBACK
Figure 6-34 UTILITY TALKBACK
Select the desired Matrix and Aux channels to enable
for Talkback.
By default, the Talkback button operates in a latching
manner. Press the talkback button on the mixer to en-
gage the input and the button illuminates. Press again
to disengage and the button turns off. The talkback but-
ton can be changed to operate in a momentary (push to
talk) method by deselecting the talkback latch button
on the TT control or LCD via UTILITY/TALKBACK.
6.14.3 STEREO INPUT ASSIGN
Figure 6-35 UTILITY STEREO INPUT ASSIGN
This screen routes the selected stereo input (
DIGI-
TAL
,
TAPE/CD A
, or
TAPE/ CD B
) to the main mix.
SOLO
Activate the
SOLO
button to cue the signal prior to
routing to the speakers.
MONO
Activate the
MONO
button to send the summed mono
signal to
both
the
LEFT
and
RIGHT
outputs.
