16
TT24 DIGITAL LIVE CONSOLE
TT24 DIGIT
AL LIVE C
ONS
OLE
Press the
FAT
button to display the selected channel’s
OVERVIEW Touchscreen with all channel settings and
meters. Although not all parameters can be adjusted
from the OVERVIEW screen, touching a non-adjustable
parameter opens its dedicated screen (i.e., touch the
EQ graph to open the EQ Touchscreen).
The specific information displayed and adjusted from
the OVERVIEW screen depends on the selected channel
type: Analog, Digital, Line, Effect Return, Group, Master,
and Aux (see
Overview Touchscreens
on page 35).
3.4.2 EQ
Press the
EQ
button to display the selected channel’s
EQ Touchscreen. Depending on the channel type, it will
be either:
• 4-BAND EQ: Four parametric EQ filters for Input
Channels and Group Masters.
See
Four-Band Equalizer
on page 38 for more infor-
mation.
• 6-BAND EQ: Two parametric EQ filters, high- and
low-shelf filters, and two narrow-band kill filters for
Aux Masters and Main Outputs (L/R and C/Mono).
See
Six-Band Equalizer
on page 39 for more infor-
mation.
• 31-BAND EQ: Three 31-band graphic EQ filter for
the Main Outputs (L/R and C/Mono).
See
31-Band Equalizer
on page 39 for more infor-
mation.
3.4.3 DYN
Press the
DYN
button
to display the selected
channel’s DYNAMICS
(Analog channel) or
COMPRESSOR (Aux Send
Masters, Groups, and
Main Outputs) Touch-
screens. The DYNAM-
ICS Touchscreen has
the Gate/Expander and
Compressor settings and
their associated meters.
Touch the Gate or Dynam-
ics graphs to open their
dedicated Touchscreens
(although most parame-
ters can be accessed from
the DYNAMICS Touch-
screen).
See
Dynamics
on page
40 for complete details.
3.4.4 GRP/AUX
Press the
GRP/AUX
button to display the GRPS/AUX-
ES Touchscreen. Touch a GROUPS assignment button to
assign the selected channel to that Group. The Quick-
Mix knobs adjust the selected channel’s level to the 12
Aux Sends. Push a QuickMix knob to toggle that Aux
Send pre- or post-fader.
See
Groups/Auxes
on page 44 for more information.
3.4.5 AUX MSTR
Press the
AUX MSTR
button to display the AUX
MASTER Touchscreen. The 12 Aux Master Sends can be
adjusted using the QuickMix knobs. The selected Aux
Master is listed in the top left of the screen. Change
the selected Aux Master by pressing the desired Aux’s
QuickMix knob.
The top-half of the AUX MASTER Touchscreen
displays the overview information for the selected Aux
Master: metering, compression and EQ curves. Touch
the EQ or Compression displays to open their associ-
ated Touchscreens (or press the
EQ
or
DYN
QuickMix
buttons).
Each Aux Send Master also has an OVERVIEW Touch-
screen that can be displayed by selecting an Aux Master
and pressing the
FAT
button (see page 37).
See
Aux Master
on page 43 for more information.
Figure 3-5 QuickMix Section
DYN
EQ
GRP/
AUX
FAT
SETUP
CTRL
COPY
HELP
UTIL
PASTE
STORE
RECALL
EFX
SNAP
AUX
MSTR
MATRIX
SNAPSHOTS
QuickMix
section
Snapshot
section
Engineer's Utility
Area
