12
Quickstart Guide
NANOCOLOR
®
UV
/
VIS
II /
VIS
II V 2.00/09‑2022
UV/VIS II
Open Mode, 01.03.2016, 10:57
M
10
Sept
1:x
1+x
Settings
Power saving mode
Dilution Format
Backup
Sipper
NTU Check
Lamp Settings
Reaction Time
Remember Sample
Place
Printer
Sound
Memory Settings
Date & Time
Region
Language
Select region
AR (Argentina)
AT (Österreich)
AU (Australia)
BE (Belgique)
BE (België)
BG (БЪԓгариЯ)
Fig. 7: Predefined list
A new list entry can be created here by pressing
+
in the upper right‑hand corner of the list.
A number pad or a keyboard appears to input
the new list entry. After successful input, the
new entry appears in the list. Deleting entries is
possible only in dynamic lists. To delete an entry,
hold it down briefly. A trashcan icon appears. The
list entry is deleted by pressing this icon.
UV/VIS II
Open Mode, 01.03.2016, 10:57
0.0
0.0
0.0
0.0
OK
Seleccionar patrón
0-04 Amonio 10 (REF 925 011)
0-05 Amonio 50 (REF 925 012)
0-06 Amonio 200 (REF 925 013)
0-07 AOX 3 (REF 925 07)
0-08 Amonio 100 (REF 925 013)
0-09 Plomb (REF 925 016)
+
Standard Measurement
OK
Standard
Method
Submethod
Cuvette
Setpoint
Margin
Standard LOT
Test LOT
Select standard
0-04 Ammonium 10 (REF 925 011)
0-05 Ammonium 50 (REF 925 012)
0-06 Ammonium 200 (REF 925 013)
0-07 AOX 3 (REF 925 07)
0-08 Ammonium 100 (REF 925 013)
0-09 Lead 5 (REF 925 016)
+
Fig. 8: Dynamic list
Step 3: Perform test
WARNING
Possible hazards upon contact with chemical and biological substances. Working
with samples, reagents, and the corresponding accessories is associated with
hazards.
When working with the cuvettes, it must be ensured that suitable protective equipment is
worn. Observe the safety data sheet (SDS) of the test kit used.
NOTICE
Clean all cuvettes before insertion using a lint‑free cloth to remove contamination or
moisture on the cuvette and prevent soiling of the cuvette shaft.
J
